Rock River Arms Extended A2 flash hider.  Measures 2 inches long to bring a 14.5 barrel out to 16 inches when attached. Standard 1/2 X 28 threaded and predrilled for 1/8 inch roll pin (not supplied) for permanently attaching to barrel.
Made in the U.S.A.

Our Price: each $29.95

     

In Stock

Sabre Defence Tactical Gill Brake 5.56, 1/2 x 28 thread pitch. The proprietary design makes effective use of the expanding gas in order to keep the muzzle down. Muzzle flip is almost eliminated and the result is one of the flattest-shooting 5.56mm rifles. This allows for very rapid follow up shots and tighter groups.  

Our Price: each $99.00

     

In Stock

Allows you to mount any 1/2x28 TPI threaded accessories such as a suppressor, a flash hider from an AR15 or a fake suppressor. This thread adapter easily replaces the factory barrel nut and is installed with only a standard open end 9/16 wrench.

Our Price: each $24.99

     

In Stock

Patented 15 degree helix guarantees complete propellant burn and negligable flash.  Right hand flutes are self tightening and will not loosen under heavy sustained fire.  The aligning of exiting gases helps to improve overall accuracy.  This is the flash hider to have for use with night vision devices.  1/2 x 28 standard AR15 thread.

Our Price: each $48.00

     

In Stock

1/2 x 28 standard AR15 thread.

Our Price: each $8.00

     

In Stock

Directs muzzle blast and sound forward, away from the shooter, while retaining effective muzzle brake properties. Very low dust signature, without swirling effect. Works as an improvised breaching devise. 5.56/.223 (1/2 x 28 TPI). Includes crush washer.

Our Price: each $64.00

     

In Stock

Patented 15 degree helix guarantees complete propellant burn and negligable flash.  Right hand flutes are self tightening and will not loosen under heavy sustained fire.  The aligning of exiting gases helps to improve overall accuracy.  This is the flash hider to have for use with night vision devices.  1/2 X 36 thread.

Our Price: each $57.00

     

In Stock

FOR 6.8MM

The KX3 directs the blast forwards, away from the shooter. Using the KX3 flash hider helps generate back-pressure for reliable cycling on short guns. The powerful muzzle flash of the 10.5" barrel is minimized. 

The Noveske KX3 Flash Suppressor is the latest refinement of the KFH concept. It is lighter than the KFH by 1.5 ounces, and outside dimensions remain the same. All KX3s are individually serial numbered for quality control. Standard Barrel Mounting Threads are 5/8 X 24 and includes 6.8 crush washer.

Our Price: each $125.00

     

In Stock

Designed by Greg Carlson, This aggressive-looking flash hider has six prongs that dissipate gases while retaining powder for a complete burn to minimize muzzle flash. Precision machined from high-strength 8620 steel and heat treated for extra hardness to withstand the eroding effects of hot combustion gases. 1/2 x 28 standard AR15 thread.

Our Price: each $34.95

     

In Stock

A unique design for your carbine or rifle, also serves as a effective compensator.  1/2 x 28 standard AR15 thread.

Our Price: each $44.95

     

In Stock

A unique design for your tactical AR.  Serves as a effective compensator.  1/2 x 28 standard AR15 thread.

Our Price: each $39.95

     

In Stock

For use with 11.5" barrels to be permanently attached for a 16.1" overall legal length.  1/2 x 28 standard AR15 thread.

Our Price: each $19.95

     

In Stock

Slipover design goes back over the barrel to give 16" barrels an XM177 style look.  1/2 x 28 standard AR15 thread.  Sized for HBAR or M4 profile barrels.  Can be used on .625" LW barrels, but will have a gap at the rear of the flash hider.

Our Price: each $19.95

     

In Stock

Same as above, but drilled before heat treatment and parkerizing for permanently attaching to 14.5" barrels.  1/2 x 28 standard AR15 thread.

Our Price: each $52.00

     

In Stock

Designed to reduce a common problem with compensators, too much noise directed toward the shooter. Reduces muzzle jump without hurting your ears.  1/2 x 28 standard AR15 thread.

Our Price: each $40.00

     

In Stock

Six opposing side ports direct gases outward to reduce muzzle jump. Includes jam nut for indexing.  1/2 x 28 standard AR15 thread.

Our Price: each $40.00

     

In Stock

One problem with 10.5" and shorter M-16/AR-15 barrels is a great amount of concussion is produced which can upset the shooter, and his team, especially indoors. The KX3 directs the blast forwards, away from the shooter. Using the KX3 flash hider helps generate back-pressure for reliable cycling on short guns. The powerful muzzle flash of the 10.5" barrel is minimized. 

FOR 223/5.56 CALIBER

The Noveske KX3 Flash Suppressor is the latest refinement of the KFH concept. It is lighter than the KFH by 1.5 ounces, and outside dimensions remain the same. All KX3s are individually serial numbered for quality control. Standard Barrel Mounting Threads are 1/2x28 2A

Our Price: each $125.00

     

In Stock

Allows you to mount any 1/2x28 TPI threaded accessories such as a suppressor, a flash hider from an AR15 or a fake suppressor. This thread adapter easily replaces the factory barrel nut using Walther's factory supplied barrel wrench and works equally well on 3.4" and 5" guns.

Our Price: each $24.99

     

In Stock

5 Port closed bottom, no snag flash hider.  1/2 x 28 standard AR15 thread.

Our Price: each $27.00

     

In Stock